BeBox Zone Logo
 
About
Home
News
Forums
Registry
Tech Info
BeBox Overview
BeBooks
BeBox Peripherals
BeBox Bezel
BootROM
Clock Generation
Floppy Disk Drive
Geekport
I/O Board
Infrared Ports
ISA Bus
Joystick Ports
Keyboard/Mouse Controller
Main Processor Board
MIDI Ports
Memory Controller and PCI Bridge
Parallel Ports
PCI Bus
Processor Board Overview
Processor Bus
Processors
Real-Time Clock
Reset and Interrupts
Serial Ports
SCSI
Sound System
Voltage Regulation
History
Opinions
Images
Articles
FAQs
Links
Operating Systems
Software
Contact Us





















Technical Specifications for the BeBox

I/O Devices

Sound System

A 16-bit stereo CODEC is provided to sample and play sounds. Sample Rates of 44.1 and 48 KHz and divisors are supported.

  • Line Input Compatible with the 2 V P-P levels standardized by CD audio players. Input Z > 4.7 KOhms. The connectors are two (L/R) RCA-type jacks. Ground loop subtraction is implemented.

  • Microphone Input Compatible with low-level dynamic microphones. The connector is a 3.5 mm minijack.

  • CD Audio Input Compatible with the 2 V P-P levels from CD-ROM units. Connector is a 5-pin header with retainer, compatible with the MV ProAudioSpectrum / Studio 16. Ground loop subtraction is implemented.

    CD audio cables compatible with all major brands of CD drives are readily available.

  • Headphone Output Compatible with standard 30 Ohm "walkman"-type headphones. The connector is a 3.5 mm minijack.

  • Speaker Amplifier A medium-power amplifier drives the internal computer speaker. A separate gain control is provided to adjust the volume of the speaker.

  • Line Output Compatible with the 2 V P-P levels standardized by CD audio players. The connectors are RCA jacks. Ground loop subtraction is implemented.





 Questions? Comments? Contact Andrew Lampert (webmaster at bebox dot nu).


BeUnited
BeBits
LeBuzz Blog
BeOS Radio
BeDope

© 1998-2009 Andrew Lampert